Water Immersion Test Chamber

Caratteristiche e vantaggi

1. STD IP X7 immersion testing is defined as immersion in up to one meter of water.

2. STD IP X8 immersion testing is defined as immersion in over one meter of water.

3. Our main rain chambers include dripping water test chamber, spraying water test chamber, water jets test chamber and high temperature and high pressure water test chamber.

Specifiche

Water Immersion Test Chamber Application

Water immersion test chamber is complying with IEC 60529 Ipx7 and Ipx8 grade simulating water depths of 1-50m with pressure up to 50bar.

Water immersion tank can be used in electronics, automotive and aerospace. In the automotive industry, such as automotive sensors, control modules and other components will also use this chamber because these components may face water contact conditions such as rain and car washing.

Water Immersion Test Chamber Working Principle

The water immersion test chamber simulates the water immersion conditions that the product may encounter in actual use. 

Firstly, place the specimen on the internal bracket, cover the lid, lock the screw, set the test pressure and time after starting the equipment and injecting water so that the product is soaked in water for some time, if there is a leak point of the unqualified specimen the air will be pressed into the its cavity to appear bubbles.

After the immersion test, the test piece is taken out for a thorough inspection and evaluation to determine whether it meets the requirements of the waterproof rating requirement.

How to Choose Proper Water Immersion Test Chamber?

Ensure that the internal size is sufficient to accommodate various test pieces. Mode R78-600 with 600L interior volume,meanwhile you can custom any size to fit special product.

Non-standard customization: In addition to standard water immersion test chamber, custom chamber can also be provided according to special requirements such as the simulation of water pressure up to 100 meters deep. 

Safety protection: water immersion tank with three M8 hole Z-shaped tripod at the bottom for good grip to fix tank safely. Independent pressure limiting device to effectively control the pressure in the cylindrical tank ensuring normal operation.