DescriptionThe RCF 2 Rolling Bearing Tribometer is designed for running friction loss tests on
WhatsApp : +86 13816217984
Email : info@qinsun-lab.com
The RCF 2 Rolling Bearing Tribometer is designed for running friction loss tests on rolling element bearings, including large and heavy axial load taper roller bearings. Two alternative test assemblies are available, one for testing smaller bearings at loads up to 10 kN and one for testing large bearings at loads up to 40 kN. The maximum speed is 7.500 rpm.
| Contact Configurations: | Taper Roller Bearing | |
| Angular Contact Bearing | ||
| Thrust Ball Bearing | ||
| Roller Thrust Bearing | ||
| Rotational Speed: | 100 to 7.500 rpm | |
| Motor: | 4.0 kW ac @ 1.500 rpm | |
| 50% overload available for 30 seconds | ||
| Heated Block Power: | 550 W | |
| Temperature Sensor: | k-type thermocouple | |
| Vibration Sensor: | piezo-electric type with adjustable threshold sensitivity and cut-off time | |
| Interface: | Serial Link Interface Module | |
| Software: | COMPEND 2000 | |
Controlled Parameters | ||
| Rotational Speed | ||
| Temperatura | ||
| Carico | ||
| Durata della prova | ||
Recorded Parameters | ||
| Rotational Speed | ||
| Friction Torque | ||
| Temperatures | ||
| Number of Revolutions | ||
| Durata della prova | ||
| Vibration Sensor Output | ||
RCF 2/10 Low Load Range Test Assembly | ||
| Friction Torque: | 10 Nm In-line Torque Transducer | |
| Load Reaction: | Spindle Bearings | |
| Spindle Bearing Load: | 10.000 N @ 3.000 rpm | |
| 4.000 N @ 7.500 rpm | ||
| Maximum Test Bearing O/D: | 60 mm | |
| Maximum Temperature: | 150°C | |
RCF 2/40 High Load Range Test Assembly | ||
| Friction Torque: | Torque Arm and Load Cell | |
| Load Reaction: | Bearing Housing | |
| Spindle Bearing Load: | 40.000 N | |
| Maximum Test Bearing O/D: | 180 mm | |
| Maximum Temperature: | 150°C | |
Services | ||
| Electricity: | 380/415 V, three phase, | |
| 50/60 Hz, with neutral & earth 7.5 kW | ||
| Clean, dry air: | 4 cfm at 8 bar (120 psi) | |
Installation | ||
| Floor-standing Machine: | 900 x 600 x 2000 mm high, 250 kg | |
| Bench-mounting cabinet: | 530 x 420 x 300 mm high, 20 kg | |
| Packing Specifications: | 2.2 m3, GW 600 kg, NW 450 kg | |
Disclaimer: Il contenuto di cui sopra è per riferimento e comunicazione solo tra addetti ai lavori del settore e non garantisce la sua accuratezza o completezza. Secondo le leggi e i regolamenti pertinenti e i regolamenti di questo sito web, le unità o le persone fisiche che acquistano articoli correlati devono ottenere qualifiche e condizioni di qualificazione valide.
Telefono aziendale
+86-21-6420 0566
Orario di lavoro
Da lunedì a venerdì
Telefono cellulare:
13816217984
Posta elettronica:
info@qinsun-lab.com
