Martindale Abrasion And Pilling Tester

Martindale Abrasion & Pilling Tester To determine the abrasion and pilling resistance of all kinds of textile structures. Samples are rubbed against known abrasives at low pressures and in continuously changing directions. The amount of abrasion or pilling is compared against standard parameters.

The unique design of our Martindale abrasion tester allows removal of individual sample holders for examination without lifting the top motion plate. It provides individual counters and parking function, interval time settable and a large touch-screen display. Standard sample holders and 9 and 12kpa Weights are included.

The Martindale abrasion tester is available with 4. 6. 8 or 9 test positions.

Martindale abrasion tester working principle:

La provetta di tessuto è posta nel morsetto del campione e sarà strofinata con abradant in una figura Lissajous. Secondo il requisito, una volta che la provetta è rotta, la provetta dovrebbe essere presa giù per calcolare il suo indice di resistenza all'abrasione, o valutare la sua valutazione di pilling attraverso la descrizione visiva.

Norme di prova:

ISO 12947: Textile abrasion resistance test standard using the Martindale method to evaluate specimen damage, mass loss, and appearance changes.

ISO 5470-2: Abrasion resistance test for rubber or plastic-coated fabrics, measuring wear volume or rate via the Martindale abrasion machine.

GB/T 13775: Textile seawater color fastness test, assessing color change of specimens and staining of adjacent fabrics after seawater immersion.

GB/T 21196: Textile pilling resistance test using the circular locus method to simulate friction-induced pilling.

FZ/T 20020: Wool textile appearance retention test after washing, evaluating dimensional stability, wrinkling, and accessory changes post-wash.

ASTM D4966: Textile abrasion resistance test (Martindale method) for apparel and home furnishings.

BS 3424-24: Textile water spot color fastness test, rating color change and staining after water immersion.

IWTO DRAFT TM 40: Wool textile dimensional stability test using the Martindale method to assess abrasion resistance and appearance changes.

ISO 20344: Footwear test methods standard covering mechanical (abrasion, puncture resistance) and chemical (waterproofing, slip resistance) properties.

BS EN 388: Protective gloves mechanical performance test standard, including abrasion, cut resistance (Coupe/TDM), tear, and puncture resistance ratings.

BS-EN-13770: Knitted footwear abrasion resistance test standard via the Martindale method to evaluate fabric wear performance.

ISO 12945: Textile abrasion resistance test (possibly related to pilling), requiring confirmation with the standard text for specifics.

GB/T 4802.2: Textile pilling resistance test using the circular locus method to grade surface pilling on fabrics.

ASTM D4970: Textile color fastness to rubbing test, assessing dry/wet dye transfer with gray scale ratings.

M&S P17: Marks & Spencer standard wash color fastness test, evaluating color retention on specified adjacent fabrics post-laundering.

Woolmark TM 196: Wool textile shrink-proof certification, testing felting and appearance changes after machine washing/drying to meet Woolmark requirements.

Caratteristiche:

Multi-stroke quick change design The aerospace-grade aluminum material cover is a kind of removably designed for easy installation of specimens; Multiple standard speeds are available, which involving 47.5 rpm and 0.5X47.5 rpm, 1.25X47.5 rpm, and1.5x47.5rpm.

Intelligent operating touch screen

Color touch screen with icon control, easy to understand and use, bilingual switching between Chinese and English, single and multiple test options, with friction materials life reminder function, and two kinds of operating modes like built-in standard test program and custom test.

Stainless steel weight&imported aviation aluminum guide plate The working guide adopts a small degree of deformation of the aviation aluminum material; the weight and the test position are correspondingly numbered, which is convenient for recording the test result and analyzingthe test result; supportingthe installation of the weight and the sample fixing auxiliary fixture to reduce the deviation of the result caused by theoperation difference.

Multiple test loads available

The Martindale Wear and Puckering Tester is available with three loads, 3 kPa, 9 kPa and 12 kPa; it can also perform a puckering test; it is powerful, safe and reliable.

Highly automated

The instrument has a variety of built-in experimental modes that can be set to single or multiple modes. The instrument will beep when the test value reaches the preset value, and you can also set a countdown timer, which is both convenient and efficient.

Parametri tecnici:

Configurazioni degli strumenti e materiali di consumo:

1. Assemblea del supporto del campione di 9 insiemi;

2,9kPa, 12kPa peso aggiuntivo di carico , ciascuno di 9;

3.￠38mm, ￠140 Taglierina in feltro abrasivo/tessuto di supporto mm di 1 set;

4.￠38mm, ￠140 Tappeto di taglio del campione di prova di mm di 1 set;

5.Pilling Test Suite di 1 set;

6.SM-50 Fotografie per pilling test di 1 set;

7.EMPA Standard Fotografici per Pilling Test di 1 set e SM-25 Standard Abradente Tessuto di 1.6m×5m;

8.Standard Schiuma di sostegno. Larghezza di 1.5m, lunghezza di 0.5m. Confezione da 4;

9.Standard Feltro di sostegno pezzo di 1;

10.￠90 Dischi di feltro di supporto standard (confezione da 20);

11.￠38mm, ￠140 mm lame di ricambio della fresa del campione, 50 ciascuna;

12. Altri accessori necessari raccomandati dal produttore.

Specifications：

Drive system is PLC, programmable control with large touch-screen

①、Abrasion test

Max stroke of movement 5+/-0.5mm

Weight of holder and spindle 200+/-1g

②、Pilling test

Max stroke of movement 24+/-0.5mm

Weight of holder and spindle 155+/-1g